Windows 8 Automatic Repair Loop Fix. Try them one by one whe. Check the disk and run the system file checker scan.
Restart your pc to see if the problem is fixed or not. After the successful diagnosis, check the results and see if the problem continues to persist. Running the bootrec utility to rebuild the bcd / mbr might fix the automatic repair loop problem.
Select “command prompt” in the “advanced options”. Run the 'startup repair' tool from the windows boot disk. Wait for some time until the diagnosing process is complete.
Try Limiting The Boot Loops.
Press and hold the power button until your computer turns off. Type the following set of commands at the command prompt, one by one. Restart the pc and keep pressing f8 to get it into windows boot manager. Repeat these steps up to three times until you see the windows logo or “ please wait ” screen. Finally, choose the startup repair option and this will allow windows 11 to diagnose the issue.
Enter The Command “Chkdsk C:
Methods to fix automatic repair loop in windows 10 precisely. When windows registry files get damaged then also the automatic repair loop issue may trigger. After the successful diagnosis, check the results and see if the problem continues to persist. Select “command prompt” in the “advanced options”. Easeus professional technical team can help you solve any system startup errors, including system failure, system blue screen, system black screen, and so on.
In the “troubleshooting” menu, select the “advanced options” option. Let continue automatic repair, still not starting normally. This page offers 7 fixes for startup repair infinite loop in windows 7, 8, 8.1 and 10, including boot into safe mode for automatic repair, run chkdsk command to check and fix drive corruption, run bootrec command to rebuild the damaged bcd, run system restore to revert windows to an earlier normal state, and more.
Tried By Entering Advanced Options And Run Chkdsk /R For Drives, Scanned And Worked For Long But No Use.
Check the harddrive for issues. Repeat these steps up to three times until you see the windows logo or “ please wait ” screen. Then click on see advanced repair options. Then press the power button again to power on the device. Select “command prompt” in the “advanced options”.
Press And Hold The Power Button For 20 Seconds And See If It Will Boot Up Normally.
Backup your files if windows won’t start. Restart your pc to see if the problem is fixed or not. Safe mode is a diagnostic tool, but it may be trying to load this basic windows version that fixes your startup error, and the repair loop will no longer trigger. If your windows cannot boot because of the preparing automatic repair or diagnosing your pc error, you can do a hard reboot. Run bootrec to reach command prompt: