How To Reset An Att Router. just turn it off and turn it on again. See if the broadband or service status lights are solid green.
Steps for disabling wifi on an at&t modem or router. Press and hold the red reset button on the back of the gateway for 20 seconds. Dsl, unplug the phone cord from your modem or gateway.
Wait until the gateway restarts and all the status lights are lit. Open up a browser window (for example, firefox, chrome, or opera). You can then change them back after the factory reset.
Unplug The Router And Modem.
Wait at least 60 seconds and then plug in the router. Plug the router back in. May take several minutes for the gateway to fully restart. With something small and pointed, like a paperclip, hold down the reset button for 30 seconds. Press and hold the red reset button on the back of the gateway for 20 seconds.
Open Your Web Browser And Enter At&T Router Login Ip168.1.254 Into The Ip Address Bar Of Your At&T Router.
Put the internal battery back in if you have one. You can then change them back after the factory reset. All i want to do is reset the router. Some routers also offer the ability to issue a reset command using the windows telnet client. Do not press the reset button for more than nine seconds.
Note that this will reset the wifi network name (ssid) and password to the defaults printed on the label. Restart your gateway or modem manually. The 2.4 ghz and the 5 ghz.
Note That This Will Reset The Wifi Network Name (Ssid) And Password To The Defaults Printed On The Label.
If you let go before 10 seconds, the gateway will reboot, but it won’t reset. The reset button is either on the back or the bottom. Next, in the address bar of your browser, type in the following: On many routers, if you hold in the button for 10 seconds, it factory resets your router. Wait at least 2 minutes before testing or using the devices.
Open Up A Browser Window (For Example, Firefox, Chrome, Or Opera).
If you let go before 10 seconds, the gateway will reboot, but it won’t reset. Unplug the router for 30 seconds. Unplug the telephone cord from the back of your modem or gateway. Wait at least 60 seconds and then plug in the router. Plug in the modem and press the power button to turn it on, if needed.