How To Configure A Wireless Router As An Access Point. Launch a web browser from a device that is connected to your router's network. This way the new router can be set to only allow 802.11n connections, so the old clients won’t connect and degrade the performance.
This is usually 192.168.1.1 or 192.168.0.1. Enter the password for the access point mode wifi router that was configured first. If a new window prompts for credentials, leave the user name blank and enter “admin” as your password then click ok.
Now router is automatically restarted. A router can be used to connect one computer or multiple computers to the internet. Use an ethernet cable to connect the access point to the router.
Click Ssid1 Click In Check Box.
Open a browser and type the ip address on the label of the router. This is usually 192.168.1.1 or 192.168.0.1. Start by configuring the general settings. Setup wireless authentication /interface wireless. The software configuration for an access point is a little more involved, but still not very complicated.
Your Lan's Router Has A Dhcp Server And You Don't Want The Two To Conflict.
In addition to changing general settings, turning a wireless router into an access point consists of disabling its dhcp server and hooking it up to the new router correctly. This ip address should be outside the main router’s dhcp range. Click connection type drop down mane and select ip_ bridge. To connect wirelessly, enter the password for the ap device. Turn off router b's dhcp server function.
Click connection type drop down mane and select ip_ bridge. Turn off router b's dhcp server function. This can be easy if you have ethernet cabling at the location where you want to place the ap.
12.Click Dhcp Transparent Transmission And Click Submit Button.
If the device is powered by an ac/dc adapter, connect it to the access point and plug it into an electrical socket. Click ssid1 click in check box. If you have other existing access points on the network, you can set the same ssid details so that your client devices will see just the one wireless network. Ensure that the interfaces belonging to the wireless lan are added to the bridge. Log into router b's interface again by pointing a browser to its new ip address you manually set in step 3 (in our case, it was 192.168.1.2) then.
You Take It Out Of The Box, Put It On A Shelf Or On Top Of A Bookcase Near A Network Jack And A Power Outlet, Plug In The Power Cable, And Plug In The Network Cable.
The default user name is admin. This can be easy if you have ethernet cabling at the location where you want to place the ap. Discover the ip address of the primary router by typing in cmd in the ‘start menu’ of the windows 10 interface. 13.go to wlan tab and change your ssid router name and password. This is usually 192.168.1.1 or 192.168.0.1.
